|Port||24 GE SFP ports or 10GE SFP+ports|
|Forwarding performance||358 Mpps|
|switching capacity||480 Gbit/s|
|MAC address table||
Supports 128 K MAC address entries.
Supports automatic learning and aging of MAC addresses.
Supports static, dynamic, and blackhole MAC address entries.
Supports packet ﬁltering based on source MAC addresses.
Supports up to 4,096 VLANs.
Supports guest VLANs and voice VLANs.
Supports VLAN assignment based on MAC addresses, protocols, IP subnets, policies,
Supports 1:1 and N:1 VLAN switching.
Supports basic QinQ and selective QinQ.
Supports static routing, RIP v1, RIP v2, ECMP, and URPF.
Supports OSPF, IS-IS, and BGP.
Supports policy-based routing.
Supports routing policies.
Supports static routing.
Supports manual tunnels.
Supports 6-to-4 tunnels.
Supports ISTAP tunnels.
Supports Neighbor Discovery (ND).
Supports IPv6 Ping, IPv6 Tracert, and IPv6 Telnet.
Supports 6-to-4 tunnels, ISATAP tunnels, and manually conﬁgured tunnels.
Supports ACLs based on the source IPv6 address, destination IPv6 address, Layer-4
port, or protocol type.
Supports MLD v1/v2 snooping.
Supports static Layer-2 multicast MAC addresses.
Supports MAC-based multicast forwarding.
Supports IGMP snooping and fast leave.
Supports multicast VLAN.
Supports MLD snooping.
Supports IGMP proxy.
Supports controllable multicast.
Supports port-based multicast trafﬁc statistics.
Supports IGMP v1/v2/v3.
Supports PIM-SM, PIM-DM, and PIM-SSM.
Supports rate limit on packets sent and received by a port.
Supports packet redirection.
Supports port-based trafﬁc policing and two-rate three-color CAR.
Supports eight queues on each port.
Supports multiple queue scheduling algorithms including WRR, DRR, SP, WRR+SP, and
Supports re-marking of the 802.1p priority and DSCP priority.
Supports packet ﬁltering based on Layer 2 to Layer 4 information, ﬁltering out
invalid frames based on the source MAC address, destination MAC address, source IP
address, destination IP address, port number, protocol, and VLAN ID.
Supports queue-based rate limit and trafﬁc shaping on ports.
Supports STP, RSTP, and MSTP.
Supports BPDU protection, root protection, and loopback protection.
Supports the RRPP ring topology and RRPP multi-instance.
Supports the Smart Link tree topology and Smart Link multi-instance to implement
millisecond-level protective switchover between active and standby links.
Supports BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM.
Supports hierarchical user management and password protection.
Supports DoS attack defense, ARP attack defense, and ICMP attack defense.
Supports binding of the IP address, MAC address, port number, and VLAN ID.
Supports port isolation, port security, and sticky MAC.
Supports blackhole MAC addresses.
Supports limit on the number of MAC addresses to be learned.
Supports IEEE 802.1x authentication and the limit on the maximum number of users
on a port.
Supports multiple authentication methods including AAA, RADIUS, HWTACACS, and
Supports SSH v2.
Supports CPU protection.
Supports blacklisting and whitelisting.
|Management and maintenance||
Supports intelligent stacking (implemented by service ports).
Supports MAC Forced Forwarding (MFF).
Supports Virtual Cable Test (VCT).
Supports Ethernet OAM (IEEE 802.3ah and 802.1ag).
Supports local port mirroring, Remote Switched Port Analyzer (RSPAN), and packet
forwarding on an observing port.
Supports remote conﬁguration and maintenance by using Telnet.
Supports SNMP v1/v2/v3.
Supports the Network Management System (NMS) and Web management.
Supports system logs and multi-level alarms.
Supports MUX VLAN.
Supports 802.3az (Energy Efﬁcient Ethernet).
Operating temperature: 0°C to 45°C (long term); –5°C to 50°C (short term);
relative humidity: 10% to 90% (non-condensing)
Rated voltage: 100 V to 240 V, 50/60 Hz
Maximum voltage: 90 V to 264 V, 50/60 Hz
|Dimensions: width x depth x height||442 mm x 420 mm x 43.6 mm|
|Power consumption||165 W|