Enterasys K-Series K6 Chassis

Rate this post
 
K-Series Models K6 K10
Performance/Capacity
Switching Fabric Bandwidth 280 Gbps 440 Gbps
Switching Throughput 190 Mpps (Measured in 64-byte packets) 299 Mpps (Measured in 64-byte packets)
Routing Throughput 190 Mpps (Measured in 64-byte packets) 299 Mpps (Measured in 64-byte packets)
Address Table Size 32,000 MAC Addresses 32,000 MAC Addresses
VLANs Supported 4,096 4,096
Transmit Queues 11 11
Classification Rules 8,196/chassis 8,196/chassis
Packet Buffering 3.0GB 4.5GB
Physical Specifications
Chassis Dimensions (H x W x D) H: 22.15 cm (8.719")
W: 44.70 cm (17.60")
D: 35.546 cm (14")
5U
H: 31.02 cm cm (12.219")
W: 44.70 cm (17.60"")
D: 35.546 cm (14")
7U
Host Memory and Flash 1Gb DRAM
32 MB flash memory
1Gb DRAM
32 MB flash memory
Environmental Specifications
Operating Temperature +5 °C to +40 °C (41 °F to 104 °F)
Storage Temperature -30 °C to +73 °C (-22 °F to 164 °F)
Operating Humidity 5% to 95% relative humidity, non-condensing
Power Requirements 100 to 125 VAC, 12 A or 200 to 250 VAC, 7.6 A; 50 to 60 Hz (Max per power supply)
Power over Ethernet Specifications
System Power
  • Automated or manual PoE power distribution
  • Per-port enable/disable, power level, priority safety, overload, and short-circuit protection
  • System power monitor
  • PoE Power:
    400W per power supply (100 to 125 VAC) 2400W Max.
    800W per power supply at (200 to 250 VAC) 4800W Max.
Standards Compliance
  • IEEE 802.3af
  • IEEE 802.3at
Agency and Standards Specifications
Safety UL 60950-1, FDA 21 CFR 1040.10 and 1040.11, CAN/CSA C22.2 No.60950-1, EN 60950-1, EN 60825-1, EN 60825-2, IEC 60950-1, 2006/95/EC (Low Voltage Directive)
Electromagnetic compatibility FCC 47 CFR Part 15 (Class A), ICES-003 (Class A), EN 55022 (Class A), EN 55024, EN 61000-3-2, EN 61000-3-3, AS/NZ CISPR-22 (Class A). VCCI V-3. CNS 13438 (BSMI), 2004/108/EC (EMC Directive)
Environmental 2002/95/EC (RoHS Directive), 2002/96/EC (WEEE Directive), Ministry of Information Order #39 (China RoHS)